Skip to main content
Shasama Fermetures
Old wooden up-and-over garage door raised beneath the ceiling before replacement
Installation

Up-and-over door replaced with a motorised sectional door in Gennevilliers

5 photographs

Replacement of an old up-and-over door with a motorised sectional garage door on rue des Collines in Gennevilliers (92): old frame removed, new door and its motor fitted.

Shasama Fermetures worked on rue des Collines, in Gennevilliers, on a garage closed by an old wooden up-and-over door. The door and its frame were removed, then a new motorised sectional door was fitted, photographed closed from inside and then open and closed from the driveway.

Main viewTechnician removing the old up-and-over garage door frame at the edge of the opening

What was carried out on site

  • Remove the old up-and-over door and its frame
  • Fit the new sectional door and its tracks
  • Install the motor and its rail on the garage ceiling
  • Run the new door through opening and closing

Intervention facts

Location
Gennevilliers · Gennevilliers (92)
Closure type
Motorised sectional garage door
Specific intervention
Replacement of an up-and-over door with a motorised sectional door.
Client profile
House garage
What we did
Replacement of an old up-and-over door with a motorised sectional garage door on rue des Collines in Gennevilliers (92): old frame removed, new door and its motor fitted.
Project category
Installation
Project photos
5 photographs

From inspection to return to service

This sequence describes our working method for this type of intervention. Job-specific operations are listed separately when they have been confirmed.

  1. Inspect and diagnose

    Review the closure, its sticking points and the site constraints before any action is taken.

  2. Work methodically

    Carry out the agreed actions with a protected work area suited to the equipment.

  3. Adjust the components

    Check alignment, guides and the settings needed for smooth, regular travel.

  4. Test the closure

    Check movement, stops and overall behaviour before returning the access.

The matching service, explained step by step: Garage door installation

All our work on this type of closure: Residential doors

What to monitor afterwards

After installation, the first operating cycles provide useful reference points for alignment and consistency.

  • Visually check that the guides stay clear and the curtain lowers without drifting.
  • Avoid impacts and deposits at the foot of the closure, especially during the initial handover period.
  • Request an inspection if play, rubbing or a change in travel appears.

Project report

5 captioned on-site photographs

View 3 of 5New sectional garage door closed, seen from inside the garage after replacement
View 4 of 5New sectional garage door raised, seen from the driveway in front of the garage opening
View 5 of 5New sectional garage door closed within its brick surround, seen from outside the garage
Nearby projects
SMS confirmation: a Shasama Fermetures technician is on the way
Rapid response

Need an intervention?

An operator on the line, a technician at your door. Available 24/7.

01 87 66 40 33Call usFree Quote