Wimal Chell
J’ai fait un appel à la société Shasama Fermetures . Ils ont venu rapidement , pour réparer mon Rideaux Metalique Au centre commercial, Creteil Soleil Je suis très satisfait, je recommande cette société
Made-to-measure metal shutters
Metal shutters for shops, storefronts and exposed access points
Protect your premises for the long term with a made-to-measure metal shutter. SHASAMA Fermetures supports shopkeepers, businesses and managing agents in Paris and Île-de-France with measurement, installation, motorisation, repair, maintenance and 24/7 emergency response.
- Made to measureA system tailored to the opening and its use.
- 24 years of experienceEstablished metal closure expertise.
- Free quoteA detailed proposal before you commit.
- 24h/7j emergency responseA direct route when the shutter is stuck.
Four shutters, four ways to protect
Solid, micro-perforated or transparent slats, or a Cobra grille: choose the level of visibility, ventilation and protection suited to your business.
Metal curtain
Solid-slat metal curtain
A robust, fully opaque closure. Once the shutter is lowered, your premises and their contents are no longer visible. It is a reliable way to protect particularly exposed access points.
- Best for
- Shops, tobacconists, jewellery stores, storage areas and garages
- Main strength
- Complete protection and full blackout
- Trade-off
- The shopfront is no longer visible when the shutter is closed
Metal curtain
Micro-perforated-slat metal shutter
Its small perforations keep the shopfront partially visible while securing the premises effectively. They also allow air and light to pass through.
- Best for
- Boutiques, agencies, phone shops and high-street businesses
- Main strength
- Balance between security, light and visibility
- Trade-off
- The view of the shopfront remains slightly filtered
Transparent curtain
Transparent-slat curtain
Made from polycarbonate slats, this shutter protects the access while leaving the shopfront fully visible, even after closing. It is particularly well suited to businesses that want to showcase their products at all hours.
- Best for
- Pharmacies, galleries, shopping centres and premium boutiques
- Main strength
- Maximum shopfront visibility
- Trade-off
- The curtain provides less ventilation than an open grille
Metal grille
Undulated-tube metal grille
With its widely open mesh, the Cobra grille secures the access while maintaining excellent visibility and airflow. It is particularly well suited to spaces that need permanent ventilation.
- Best for
- Car parks, arcades, restaurants and technical access points
- Main strength
- Security, visibility and ventilation
- Trade-off
- Its highly open design favours visibility over concealment
Which metal shutter should you choose?
Easily compare the models by their level of security, visibility and ventilation, and their recommended uses.
Scroll the table horizontally to compare every criterion.
| Model | Visibility | Airflow | Security | Typical use |
|---|---|---|---|---|
| Solid-slat metal curtain | Level 1/3 Full blackout | Level 1/3 None | Level 3/3 Continuous closure | Shop, storage area, garage |
| Micro-perforated slat curtain | Level 2/3 Filtered shopfront view | Level 2/3 Moderate | Level 3/3 Perforated metal closure | Boutique, agency, illuminated shopfront |
| Transparent-slat curtain | Level 3/3 Very high | Level 1/3 None | Level 3/3 Continuous transparent screen | Pharmacy, arcade, premium boutique |
| Corrugated-tube metal grille | Level 3/3 Very high | Level 3/3 Very high | Level 2/3 Open mesh | Car park, arcade, ventilated access |
Breakdown, return to service or new project: find the right service below.
Stuck shutter or exposed access
We arrive, diagnose and make the opening safe. The price is stated before we touch anything.
For a new installation, return to service or upgrade to an existing shutter, go straight to the service that matches your need.
- 24/7 metal shutter emergency repair in ParisMetal shutter stuck in Paris or Île-de-France? 24/7 emergency repair for every shutter type, with a free quote before work begins.
- Metal shutter repair in ParisPlanned metal shutter repairs in Paris and Île-de-France: slats, springs, shaft, guides, lock or motor. Free diagnosis and quote.
- Metal shutter motorisation in ParisMetal shutter motorisation in Paris and Île-de-France: feasibility study, a motor sized for your shutter, controls, safety devices and a free quote.
- Metal shutter installation for shops in ParisMade-to-measure metal shutter installation for shops in Paris and Île-de-France: measurement, shutter selection, fitting, motorisation and a free quote.
- Metal shutter maintenance in ParisMetal shutter servicing and maintenance in Paris and Île-de-France: inspections, lubrication, adjustments, maintenance log and a contract tailored to the site.
Your project, made simple
The three project stages
On-site survey
We measure the opening and check the supports, clearances and intended use.
Selection and quote
The curtain body, operating system, controls and safety provisions are set out in a detailed proposal.
Manufacture and installation
The shutter is made to measure, installed, adjusted and explained before it enters service.
What makes up the quote
The quote depends on the opening, curtain body, operating system, safety provisions, finish and installation conditions.
What we check on site
The survey ensures that only the configuration suited to the opening and its use is selected.
- Opening dimensions and geometry
- Curtain type
- Operation and frequency of use
- Selected controls and safety provisions
- Finish and installation conditions
Coverage across Paris and Ile-de-France
We install, repair and respond to metal shutter calls across Paris and the whole of Ile-de-France, as well as Hauts-de-France and Reims. Check that your area is covered.
View our coverage areasSee also:Industrial closuresRoller shuttersResidential doorsRetractable awning
Frequently asked questions
- What should I do if a metal shutter stays stuck closed?
- Do not force the curtain or the control. Switch off the power if it is motorised, keep the area clear and have the mechanism checked before operating it again.
- Can a metal shutter stuck open be secured temporarily?
- It depends on the curtain position, the state of the guides and the risk to the premises. The technician first checks whether controlled closure or temporary making-safe is possible.
- How can I tell whether the motor has failed or is simply misprogrammed?
- The diagnosis checks the power supply, controls, travel limits, capacitor and motor. This avoids replacing the motor when an adjustment or another component is responsible.
- What is the difference between a solid slat shutter and a micro-perforated one?
- Solid slats completely conceal the shopfront. Micro-perforated slats leave it partially visible.
- How long does a metal shutter installation or repair take?
- A targeted repair can take a few hours. A complete installation depends on the dimensions and motorisation; the timeframe is confirmed in the quote.
- Broken metal shutter: does the tenant or landlord pay?
- Responsibility depends on the lease, the cause of the fault, the maintenance obligations and any break-in. Check the tenancy agreement and the insurer's conditions before authorising work.
- What determines the price of a metal shutter?
- The quote considers the dimensions measured on site, curtain type, operating method, controls, safety provisions, finish and installation conditions. Each item is set out after the technical survey.
- Which safety provisions are needed with motorisation?
- Anti-crushing and obstacle-detection systems compliant with NF EN 13241.
- Is authorisation or co-ownership approval required?
- Depending on the facade, co-ownership rules and the nature of the project, approval may be required before work begins. Check these rules in advance; we can provide the technical information needed for the application.
Verified reviews
Google customer reviews
Real customer feedback, verified by Google, on our repair, installation, and automation work in Paris and Île-de-France.
Excellent
5.0
Rating Based on 67 verified Google reviews
Nepveu Caroline
Efficace et très on Time. Intervention le dimanche pour un déblocage de rideau métallique
Maïssa Mehdaoui
La société shasama est intervenue pour réparer ma porte sectionelle, Ce qu’ils ont fait avec brio. Nous sommes entièrement satisfaits de leur intervention, le monsieur était très agréable et très professionnel.
Xavier F
Rapidité de l’intervention, technicien agréable, coût élevé qui peut se justifier par la demande urgente. Travail fait dans la journée
Oussama Larbés
Société très sérieuse et ponctuelle c’est déplacé pour une porte sectionnelle un jour férié le 14 juillet m’a réglé le problème en moins d’une heure. J’ai j’ai insisté pour avoir le Réglages que j’avais auparavant. Ça ne les a pas dérangé de recommencer plusieurs fois. Je recommande de très bons techniciens. Très bonne société.
Maxime Cognard
Intervention rapide, professionnel.
K.
intervention. rapide et travail excellent par l equipe, que je vous recommandé !pour un. volet roulant
Mutlu Kaya
Excellent travail hyper rapide pour réparations de rideaux métalliques
Mar mar75
Très satisfaite de l'installation de mes stores extérieurs. L'équipe a fait preuve d'un grand professionnalisme, tout en étant respectueuse des lieux et attentive aux quelques consignes que je lui avais transmises. Pour le reste, son savoir-faire a fait la différence. Malgré un carnet de commandes particulièrement chargé en cette période de canicule, elle a su être réactive. Le travail est soigné, de qualité, et le résultat est conforme à mes attentes. Je recommande cette entreprise sans hésitation. Merci Sofiane
FD ECLAIRAGE
Nous avons fait appel à cette entreprise pour remplacer les ressorts de notre porte sectionnelle, dépannage rapide et efficace. Service parfait, équipe très agréable, merci beaucoup pour la réparation de notre poignée de porte en bonus : )
Le Jardin du Coiffeur
⭐⭐⭐⭐⭐ Je recommande vivement la société Shasama. L'intervention a été rapide, efficace et réalisée avec un grand professionnalisme. Notre rideau métallique a été réparé dans les meilleurs délais et le travail est impeccable. Une entreprise sérieuse, réactive et fiable que je n'hésiterai pas à solliciter de nouveau si besoin.
TheAmiralk
Super!rapide,bon prix
Kawther Kooli
Suite à un blocage d'un Rideau métallique pour notre boutique de salon de coiffure ont a fait appeler la société shasama il sont ponctuel et très professionnel je recommande
Sabrina Bofice
Franchement heureusement Abbas étais là pour ouvrir mon magasin
Lassaad Riahi
J'ai appelé en urgence il est venu rapidement j'avais mon rideau bloqué il m'a fais un travail des professionnels avec un prix correct service au top je conseille fort
Rapid response
Need an intervention?
An operator on the line, a technician at your door. Available 24/7.