Skip to main content
Shasama Fermetures

Metal shutter repair in Paris 9th (75009)

Two Shasama Fermetures technicians working on a closed metal shutter, one at the guide rail, the other at the top
Shutter and grille repair: 24/7
  • Responsible base: Paris 11th18 Passage Gustave Lepeu, 75011 Paris
  • Diagnosis before repairCurtain, barrel, motor and controls
  • Quote before workYour agreement before any repair
  • Operating cyclesRaising, lowering and stops checked

Metal shutter stuck in Paris 9th? Closed, open or jammed halfway?

Shasama Fermetures works 24/7 to unblock and repair your metal shutter. Our technicians carry out an on-site diagnosis, find the cause of the fault and give you a free quote before any repair.

For any metal shutter repair in Paris 9th, call Shasama Fermetures on 01 87 66 40 33. Fast response across Paris and Île-de-France, subject to our teams’ availability.

Around the department stores and rue des Martyrs, Shasama Fermetures repairs the metal shutters of the 9th.

Every hour with the shutter down costs customers: we give priority to stuck shop windows. A metal shutter repair starts from 146 €, and your call is taken by the Paris 11th agency. Call us now on 01 87 66 40 33!

01 87 66 40 33

Metal shutter repairer near the department stores

Shop on rue des Martyrs that will not open, premises near the department stores with a temperamental shutter: tell us about the fault as it happened.

The 9th mixes tourist footfall with small shops on sloping streets.

The responsible base, Paris 11th, triggers the call-out.

Administrative districts covered in Paris 9th (75009): Saint-Georges, Chaussée-d'Antin, Faubourg-Montmartre, Rochechouart.

Work carried out on site: At 53 rue Notre-Dame-de-Lorette, the old box was removed before a new façade box, its motorised barrel and a Cobra grille curtain were installed.

A repair that keeps pace with the 9th

  • Answered straight away, day and night

    Emergency line active 24/7.

  • A time slot suited to the crowds

    In front of a department store, working outside peak flow protects everyone.

  • A starting point that is not fictitious

    The Paris 11th base is listed in the Shasama Fermetures register.

  • Options priced side by side

    Repair or replace: both amounts are shown.

Closed metal shutter under a canopy, reached by an outdoor staircase

Metal shutter responsiveness Paris 9th

The method does not change from one shop to another.

Tubular metal shutter motor in its housing, wiring and technical label visible
  • No call lost

    A report gets through at any hour.

  • The jam understood before acting

    The technician reconstructs the fault, without guessing.

  • Repairable parts come first

    Straightening and adjusting come before replacing.

  • Handed back in person

    You see for yourself that it works again.

  • Budget set from the start

    The amount accepted on the quote is the amount on the invoice.

Shopfront stuck? Describe the shutter or the grille.

01 87 66 40 33

Avoiding a stuck shutter on a sales day

The worst moment for a breakdown is well known.

  • A check before peak periods : A test cycle the day before rules out a nasty surprise.
  • Rails cleaned on busy streets : Heavy footfall quickly fills the guide rails with debris.
  • Safety photocells tested : Detection is checked at regular intervals.
  • Small repairs never put off : A fastener changed in time spares the whole curtain.

The schedule follows the shop’s peaks in activity.

Our jobs around the 9th

Corrugated-tube (cobra) curtain replacement on a metal shutter in Paris 9e

HINDBAG: 53 rue Notre-Dame-de-Lorette, 75009 Paris

Shasama Fermetures worked at HINDBAG, 53 rue Notre-Dame-de-Lorette in Paris 9e, to replace a metal shutter’s curtain with a corrugated-tube (cobra) mesh. The old headbox was removed, a new headbox and motor axle fitted on the frontage, then the cobra curtain mounted and the control adjusted.

Replacement of a metal shutter cobra curtain, open headbox with the motor axle visible and a ladder against the facade
Replacement of a metal shutter cobra curtain, diamond-mesh curtain partly lowered in front of the glazed shopfront
Replacement of a metal shutter cobra curtain, diamond-mesh curtain closed across the glazed shopfront

How the job went:

  1. Remove the metal shutter’s old curtain and old headbox
  2. Fit the new headbox and the motor axle on the frontage
  3. Mount the corrugated-tube (cobra) curtain on the axle
  4. Adjust the control and check the closure operates fully

Specification of the installed shutter:

  • Corrugated-tube (cobra) curtain, L 3930 DC × H 3200 + E

Our jobs in the Paris region

Prices for repairing a shop metal shutter or security grille

The price depends on the fault found, the parts needed, the type of curtain and access to the shopfront. The quote presented before any work sets out the service and the final amount for your approval.

Metal shutter emergency repair, repair and maintenance prices, including VAT (TTC)
ServicePrice
Emergency and unblocking
Emergency repair146 €
Unblocking146 €
General repair147 €
Repairs and parts
Motor and control diagnosis or repair166 €
Adjusting springs, barrel or guide rails166 €
Straightening slats213 €
Replacing slats296 €
Replacing the lock147 €
Replacing the motor395 €
Replacing the barrel (manual shutter)417 €
Replacing the barrel (motorised shutter)495 €
Replacing parts (motor capacitor)From 98 €
Replacing springs and rebalancingFrom 178 €
Adjusting or straightening guide railsFrom 225 €
Replacing guide railsFrom 295 €
Replacing a key switchFrom 98 €
Maintenance and contracts
Manual shutter maintenance98 €
Motorised shutter maintenance118 €
Annual contract (1 visit a year)From 94 €/year
Annual contract (2 visits a year)From 116 €/year

Quote terms

After the shutter is diagnosed, the quote details the work, the parts, the access conditions and the agreed time slot. It states the final amount before any work; no additional service is started without your agreement.

  • the fault and the component actually involved
  • manual or motorised shutter and the size of the curtain
  • the parts and adjustments chosen after diagnosis
  • access to the shopfront, the box and the barrel
Request a quote
Shasama Fermetures technician loading a ladder onto the service van in a Paris street at night
Expertise and
24 years of experience
  • Professional-grade equipment and parts
  • Axial, tubular or side motors, all brands: CAME, Somfy, Nice, FAAC, Simu, ACM, Doorgate, Sommer, Hörmann
  • Shop shutters and grilles: solid, micro-perforated or transparent slats, wavy-tube grille (Cobra)
  • Locks and locking systems: diagnosis and repair component by component, multipoint locks included

Frequently asked questions about shop shutters

Is a breakdown during the sales a priority?

Yes, the line answers 24/7.

My street is on a slope, should I mention it?

Yes, the slope affects the guide rails and end stops.

Can two shops be grouped into a single visit?

Two shops in the 9th can be grouped into a single visit; give both addresses so the request covers both shopfronts.

How is putting a metal shutter back on its rail priced?

The diagnosis deals with why it left the rail before the repair is priced.

My grille jumps off its rail, will a repair hold?

The diagnosis deals with the cause, not just the symptom.

How do you tell a squeak from a clatter on a metal shutter?

Describe the noise and when it happens, without repeating the tests.

To see every fault we handle, our prices and how a call-out works in the 9th, see our metal shutter repair service in Paris and Île-de-France.

Nearby

Metal shutter repair in the 9th and neighbouring arrondissements

The 9th is surrounded by three arrondissements covered by the same repair service. Each of the twenty Paris arrondissements has its own page.

SMS confirmation: a Shasama Fermetures technician is on the way
Rapid response

Need an intervention?

An operator on the line, a technician at your door. Available 24/7.

01 87 66 40 33Call usFree Quote