Skip to main content
Shasama Fermetures

Metal shutter repair in Paris 11th (75011)

Two Shasama Fermetures technicians working on a closed metal shutter, one at the guide rail, the other at the top
Shutter and grille repair: 24/7
  • Responsible base: Paris 11th18 Passage Gustave Lepeu, 75011 Paris
  • Diagnosis before repairCurtain, barrel, motor and controls
  • Quote before workYour agreement before any repair
  • Operating cyclesRaising, lowering and stops checked

Metal shutter stuck in Paris 11th? Closed, open or jammed halfway?

Shasama Fermetures works 24/7 to unblock and repair your metal shutter. Our technicians carry out an on-site diagnosis, find the cause of the fault and give you a free quote before any repair.

For any metal shutter repair in Paris 11th, call Shasama Fermetures on 01 87 66 40 33. Fast response across Paris and Île-de-France, subject to our teams’ availability.

Shasama Fermetures repairs the roller shutters and shop grilles of the 11th, manual or motorised, for shops, restaurants, workshops and co-owned residential buildings.

Here, being local is not a slogan: the team in the 11th knows your streets and secures the shopfront until the repair. A metal shutter repair starts from 146 €, and your call is taken by the Paris 11th agency. Call us now on 01 87 66 40 33!

01 87 66 40 33

Your metal shutter repair right here in the 11th

Roller shutter stuck in front of the shop, grille jammed halfway or a curtain coming down crooked? Tell us the position of the closure, the type of control and any visible damage so the diagnosis can be prepared before the call-out.

The responsible base for the arrondissement takes the request and prepares the call-out; being close by never replaces the on-site diagnosis.

On the phone, tell us about access, the position of the curtain and the control. Roquette or Saint-Ambroise help to locate the shopfront, without changing the terms.

Administrative districts covered in Paris 11th (75011): Folie-Méricourt, Saint-Ambroise, Roquette, Sainte-Marguerite.

Work carried out on site: At 123 rue de Charonne, the curtain was made to measure after the dimensions were taken, then fitted with a new motor and adjusted.

What being close by changes for your shopfront

  • A line dedicated to stuck closures

    The line takes requests 24/7, whether the shutter is closed, open or jammed halfway.

  • An identified base in the area

    The base shown comes from the Shasama Fermetures register, backed by a real address.

  • The right description before the call-out

    Access, curtain position, control and visible damage are enough to prepare the checks.

  • The shutter priced component by component

    The diagnosis separates each component so that only what is useful is kept.

Metal shutter and security grille, ladders set up for a repair in a commercial basement

Emergency response in the 11th: what to expect before the shutter is back in service

These commitments frame the repair, from the first call to the tests.

Metal shutter guide rail and its bracket, close-up view
  • A repair line reachable 24/7

    A blocked entrance can be reported 24/7, weekends and public holidays included.

  • The jam identified before any part is changed

    An obstruction, a tired spring or a motor fault: the work differs with the cause.

  • The repair targets the component at fault

    Guide rails, barrel, lock or motor: the check follows the shutter actually in place.

  • The curtain is tried over several cycles

    Rising, lowering and stops are checked before access is handed back.

  • The quote comes before the work

    The service and the amount are detailed before anything further happens.

Shopfront stuck? Describe the shutter or the grille.

01 87 66 40 33

How do you maintain the closure before the next jam?

A heavily used shopfront wears out; maintenance spots the signs before it is put out of action.

  • Guide rails, threshold and slats : Remove any obstruction and have a bent slat checked.
  • Barrel, fixings and springs : Check the alignment as soon as the shutter strains, without touching a tensioned spring.
  • Motor, switch and the safety devices fitted : Check the power supply, the switch and the limit switches actually installed.
  • Tests, corrective quote and follow-up : Run several cycles, note any faults and list the corrective work separately in the quote.

How often depends on the shutter and the documents that govern it; nothing is promised without a check.

A real job in the 11th

Motor and made-to-measure curtain replacement on a metal shutter in Paris 11e

Carrefour City: 123 rue de Charonne, 75011 Paris

Shasama Fermetures worked in the 11th arrondissement of Paris, at the Carrefour City store at 123 rue de Charonne, to replace the motor and the curtain of a metal shutter. The curtain was made to measure, to the dimensions taken at the top of the closure.

Replacement of the motor and curtain on a microperforated metal shutter, closed across the shopfront seen from inside

How the job went:

  1. Diagnose the closure on site and take the dimensions at the top of the opening
  2. Remove the metal shutter’s old curtain and old motor
  3. Make the curtain to measure to the recorded dimensions
  4. Fit the new motor, then the new curtain in its guide rails
  5. Set the limit switches and the shutter’s control
  6. Check several opening and closing cycles before returning it to service

Our jobs in the Paris region

Prices for repairing a shop metal shutter or security grille

The price depends on the fault found, the parts needed, the type of curtain and access to the shopfront. The quote presented before any work sets out the service and the final amount for your approval.

Metal shutter emergency repair, repair and maintenance prices, including VAT (TTC)
ServicePrice
Emergency and unblocking
Emergency repair146 €
Unblocking146 €
General repair147 €
Repairs and parts
Motor and control diagnosis or repair166 €
Adjusting springs, barrel or guide rails166 €
Straightening slats213 €
Replacing slats296 €
Replacing the lock147 €
Replacing the motor395 €
Replacing the barrel (manual shutter)417 €
Replacing the barrel (motorised shutter)495 €
Replacing parts (motor capacitor)From 98 €
Replacing springs and rebalancingFrom 178 €
Adjusting or straightening guide railsFrom 225 €
Replacing guide railsFrom 295 €
Replacing a key switchFrom 98 €
Maintenance and contracts
Manual shutter maintenance98 €
Motorised shutter maintenance118 €
Annual contract (1 visit a year)From 94 €/year
Annual contract (2 visits a year)From 116 €/year

Quote terms

After the shutter is diagnosed, the quote details the work, the parts, the access conditions and the agreed time slot. It states the final amount before any work; no additional service is started without your agreement.

  • the fault and the component actually involved
  • manual or motorised shutter and the size of the curtain
  • the parts and adjustments chosen after diagnosis
  • access to the shopfront, the box and the barrel
Request a quote
Shasama Fermetures technician loading a ladder onto the service van in a Paris street at night
Expertise and
24 years of experience
  • Professional-grade equipment and parts
  • Axial, tubular or side motors, all brands: CAME, Somfy, Nice, FAAC, Simu, ACM, Doorgate, Sommer, Hörmann
  • Shop shutters and grilles: solid, micro-perforated or transparent slats, wavy-tube grille (Cobra)
  • Locks and locking systems: diagnosis and repair component by component, multipoint locks included

Frequently asked questions about shop shutters

What should I do if the shop grille stays stuck closed or halfway?

Do not insist and do not lift the curtain. Make the area safe and describe the noises, position and damage during the call.

Which roller shutters and shop grilles do you repair?

Manual or motorised shutters, with solid, micro-perforated or transparent slats, and tube grilles.

Can I call about a stuck shutter at night or at the weekend?

Yes, the line can be reached 24/7, nights and public holidays included.

What does the quote cover for a faulty shutter power supply or switch?

The power supply, switch and limit switches are checked before they are replaced.

Does a motor that does not respond always need replacing?

No: the power supply, switch and limit switches are checked before any replacement.

Can a transparent curtain be kept after a control fault?

The diagnosis separates the curtain from the control to target the repair.

To see every fault we handle, our prices and how a call-out works in the 11th, see our metal shutter repair service in Paris and Île-de-France.

Nearby

Metal shutter repair in the 11th and neighbouring arrondissements

The 11th is surrounded by three arrondissements covered by the same repair service. Each of the twenty Paris arrondissements has its own page.

SMS confirmation: a Shasama Fermetures technician is on the way
Rapid response

Need an intervention?

An operator on the line, a technician at your door. Available 24/7.

01 87 66 40 33Call usFree Quote