Metal shutter repair in Paris 20th (75020)

Metal shutter repair in the 20th

Belleville grocery whose shutter will not come down, Ménilmontant workshop with a grille off its guides: describe the fault in your own words, that is enough.

The 20th lives to the rhythm of its shops, with varied closures, from manual to motorised.

The neighbouring Paris 11th base sets up the call-out.

Administrative districts covered in Paris 20th (75020): Belleville, Saint-Fargeau, Père-Lachaise, Charonne.

Work carried out on site: On rue des Pyrénées, our job combined two new guide rails and two new end plates, a manual spring barrel, interchangeable solid slats and a two-point lock.

Loyal to the 20th

• Always someone on the line

  Line active 24/7.

• A base right next door

  The Paris 11th base has a public address.

• Shutters of every age accepted

  Manual, winch or motorised.

• A quote sized to the business

  The quote respects the real economics of the shop.

Emergencies in eastern Paris

From kiosk to restaurant, these hold.

• A straightforward welcome

  Your fault can be described in a single conversation.

• An honest diagnosis

  A simple adjustment is enough, with no forced sale.

• Repairs that last

  The parts fitted match the use.

• Return to service demonstrated

  Cycles tested before leaving.

• An amount with no surprises

  The invoice follows the accepted quote.

What maintenance for shops in the 20th?

Four simple steps keep the closure reliable.

• Strap and pull checked by touch : Fraying shows before it snaps.
• The floor lock brushed : A quick brush prevents a jam.
• The full Saturday evening operation : Close, lock, reopen: a test that tells you everything.
• A professional visit if a sign persists : A symptom that keeps coming back deserves a visit.

The right pace follows your actual opening days.

Jobs around the 20th

Solid-slat metal shutter replacement in Paris 20e

Rue des Pyrénées, 75020 Paris

Shasama Fermetures replaced a metal shutter on rue des Pyrénées, in Paris 20e: two new guide rails and end plates, a manual axle with spring bobbins, then an interchangeable solid-slat curtain. The bottom slat, fitted with a two-point lock, was set before the operation was checked.

How the job went:

1. 1Remove the existing metal shutter
2. 2Fit the guide rails, the manual axle with its spring bobbins, then the curtain
3. 3Check the operation and the locking of the bottom slat

Specification of the installed shutter:

• Dimensions: L 3520 DC × 3580 EC
• Two guide rails with two end plates
• One manual axle with spring bobbins
• Two 200 bobbins with two 6.1.4 springs
• Interchangeable galvanised-steel solid-slat curtain, 8/10 mm gauge at 116 pitch
• Bottom slat, 15/10 mm gauge at 140 pitch, with a two-point lock

Our jobs in the Paris region

Frequently asked questions about shop shutters