Skip to main content
Shasama Fermetures

Metal shutter repair in Paris 5th (75005)

01 87 66 40 33
Google Reviews5.0(90)
Two Shasama Fermetures technicians working on a closed metal shutter, one at the guide rail, the other at the top
Shutter and grille repair: 24/7
  • Responsible base: Paris 13th25 rue de Tolbiac, 75013 Paris
  • Diagnosis before repairCurtain, barrel, motor and controls
  • Quote before workYour agreement before any repair
  • Operating cyclesRaising, lowering and stops checked

Metal shutter stuck in Paris 5th? Closed, open or jammed halfway?

Shasama Fermetures works 24/7 to unblock and repair your metal shutter. Our technicians carry out an on-site diagnosis, find the cause of the fault and give you a free quote before any repair.

For any metal shutter repair in Paris 5th, call Shasama Fermetures on 01 87 66 40 33. Fast response across Paris and Île-de-France, subject to our teams’ availability.

Bookshops in the Latin Quarter and shops on rue Mouffetard: Shasama Fermetures provides metal shutter repair throughout the 5th.

Your customers are waiting for you, not the fault: we assess the jam over the phone. A metal shutter repair starts from 146 €, and your call is taken by the Paris 13th agency. Call us now on 01 87 66 40 33!

01 87 66 40 33

Metal shutter repair close to the Latin Quarter

Bookshop on rue des Écoles that can no longer raise its grille, greengrocer on rue Mouffetard with a stuck curtain: a few details on the phone speed everything up.

Between sloping streets and small squares, shops in the 5th have inclined thresholds.

The neighbouring responsible base, Paris 13th, prepares each call-out.

Administrative districts covered in Paris 5th (75005): Saint-Victor, Jardin-des-Plantes, Val-de-Grace, Sorbonne.

Work carried out on site: On rue du Sommerard, we replaced the motorised barrel to the measured dimensions and refitted its spring coils before testing.

Repair as seen from the shops of the Latin Quarter

  • A switchboard that never sleeps

    Faults can be reported 24/7.

  • A neighbouring base, south of the Seine

    The 5th is served by the Paris 13th base.

  • Attention to sloping thresholds

    Inclined streets distort the bearing points.

  • A quote anyone can read

    Each line matches a specific component.

Shasama Fermetures technician measuring a metal shutter’s housing with a tape measure before the repair

Emergency metal shutter repair Paris 5th

The same method for a small stall or a brasserie.

Metal shutter motor spindle, close-up of the end plates and bearings

  • Precise record of the symptom

    Noise, position, how the control reacts: everything is noted.

  • Inspection without haste

    Forcing a shutter always costs more.

  • A ranked proposal

    Adjustment, repair or replacement, each with its amount.

  • Work only after your go-ahead

    Nothing is dismantled without written approval.

  • Tests and a final explanation

    The shutter runs in front of you.

Shopfront stuck? Describe the shutter or the grille.

01 87 66 40 33

How do you maintain a shopfront shutter in the Latin Quarter?

A shop in the 5th opens almost every day of the year.

  • Sweep the bottom rail every week : Leaves and grit build up on the threshold side.
  • Listen to the first rise of the morning : Any new noise gets noted.
  • Never insist against resistance : Two failed attempts are enough.
  • Have it checked after a delivery knock : A hand truck hitting the curtain leaves invisible marks.

The interval between two visits depends on how often you open.

Our jobs around the 5th

Motorised axle replacement on a metal shutter in Paris 5e

Rue du Sommerard, 75005 Paris

Shasama Fermetures worked on rue du Sommerard, in Paris 5e, to replace a metal shutter’s motorised axle. The old axle was removed, the new one fitted to the recorded dimensions, then the spring bobbins refitted before testing opening and closing.

Replacement of a metal shutter motorised axle, glazed shopfront opening onto a room with a table and chairs
Replacement of a metal shutter motorised axle, axle and spring bobbins visible below the rolled-up curtain

How the job went:

  1. Remove the metal shutter’s old axle
  2. Fit the new motorised axle to the recorded dimensions
  3. Refit the spring bobbins on the new axle
  4. Test opening and closing before returning it to service

Specification of the installed shutter:

  • Motorised axle (2570 DC / 2700 + E)

Our jobs in the Paris region

View all our projects

Prices for repairing a shop metal shutter or security grille

The price depends on the fault found, the parts needed, the type of curtain and access to the shopfront. The quote presented before any work sets out the service and the final amount for your approval.

Metal shutter emergency repair, repair and maintenance prices, including VAT (TTC)
ServicePrice
Emergency and unblocking
Emergency repair146 €
Unblocking146 €
General repair147 €
Repairs and parts
Motor and control diagnosis or repair166 €
Adjusting springs, barrel or guide rails166 €
Straightening slats213 €
Replacing slats296 €
Replacing the lock147 €
Replacing the motor395 €
Replacing the barrel (manual shutter)417 €
Replacing the barrel (motorised shutter)495 €
Replacing parts (motor capacitor)From 98 €
Replacing springs and rebalancingFrom 178 €
Adjusting or straightening guide railsFrom 225 €
Replacing guide railsFrom 295 €
Replacing a key switchFrom 98 €
Maintenance and contracts
Manual shutter maintenance98 €
Motorised shutter maintenance118 €
Annual contract (1 visit a year)From 94 €/year
Annual contract (2 visits a year)From 116 €/year

Quote terms

After the shutter is diagnosed, the quote details the work, the parts, the access conditions and the agreed time slot. It states the final amount before any work; no additional service is started without your agreement.

  • the fault and the component actually involved
  • manual or motorised shutter and the size of the curtain
  • the parts and adjustments chosen after diagnosis
  • access to the shopfront, the box and the barrel
Request a quote
Shasama Fermetures technician loading a ladder onto the service van in a Paris street at night
Expertise and
24 years of experience
  • Professional-grade equipment and parts
  • Axial, tubular or side motors, all brands: CAME, Somfy, Nice, FAAC, Simu, ACM, Doorgate, Sommer, Hörmann
  • Shop shutters and grilles: solid, micro-perforated or transparent slats, wavy-tube grille (Cobra)
  • Locks and locking systems: diagnosis and repair component by component, multipoint locks included

Frequently asked questions about shop shutters

My bookshop grille is stuck open, what is the risk?

Report the jam: the line can be reached 24/7.

My street is on a steep slope, does that change the job?

The slope of a street in the 5th changes how the metal shutter’s guiding is adjusted, so this constraint is taken into account during the job.

Can you come during the lunch service?

The time slot is adjusted around the rush when possible.

What should the quote cover for a metal shutter with damaged solid slats?

The diagnosis looks at the slats and the motor separately before deciding what to replace.

The motor dates from the installation, does everything need changing?

Not automatically: only a proven fault justifies a replacement.

Does a power cut allow an electric shutter to be forced open?

No. Do not force the control or the curtain; report the state of the closure.

To see every fault we handle, our prices and how a call-out works in the 5th, see our metal shutter repair service in Paris and Île-de-France.

Nearby

Metal shutter repair in the 5th and neighbouring arrondissements

The 5th is surrounded by three arrondissements covered by the same repair service. Each of the twenty Paris arrondissements has its own page.

SMS confirmation: a Shasama Fermetures technician is on the way
Rapid response

Need an intervention?

An operator on the line, a technician at your door. Available 24/7.

01 87 66 40 3301 87 66 40 33Request a quote
01 87 66 40 33Call usFree Quote