Skip to main content
Shasama Fermetures

Metal shutter repair in Paris 4th (75004)

Two Shasama Fermetures technicians working on a closed metal shutter, one at the guide rail, the other at the top
Shutter and grille repair: 24/7
  • Responsible base: Paris 11th18 Passage Gustave Lepeu, 75011 Paris
  • Diagnosis before repairCurtain, barrel, motor and controls
  • Quote before workYour agreement before any repair
  • Operating cyclesRaising, lowering and stops checked

Metal shutter stuck in Paris 4th? Closed, open or jammed halfway?

Shasama Fermetures works 24/7 to unblock and repair your metal shutter. Our technicians carry out an on-site diagnosis, find the cause of the fault and give you a free quote before any repair.

For any metal shutter repair in Paris 4th, call Shasama Fermetures on 01 87 66 40 33. Fast response across Paris and Île-de-France, subject to our teams’ availability.

The 4th is full of old shopfronts between the southern Marais and the Île Saint-Louis; Shasama Fermetures repairs shutters and grilles there.

Your old closure will be handled with care: a clear diagnosis and measured work. A metal shutter repair starts from 146 €, and your call is taken by the Paris 11th agency. Call us now on 01 87 66 40 33!

01 87 66 40 33

Metal shutter repair a short walk from the southern Marais

Closure on rue Saint-Antoine that resists, shop shutter on the Île Saint-Louis coming loose: note the exact position of the curtain before you call.

Many streets in the 4th are narrow or partly pedestrianised.

The organisation falls to the responsible base, Paris 11th.

Administrative districts covered in Paris 4th (75004): Saint-Merri, Saint-Gervais, Arsenal, Notre-Dame.

Work carried out on site: On rue de Rivoli, the old barrel was removed from a box opened in the ceiling and replaced with a motorised barrel tested going up and down.

Working on the old shopfronts of the 4th

  • A repair line that is always open

    Available 24/7.

  • Respect for old buildings

    Lintels and joinery are not drilled lightly.

  • A real base, an address you can check

    The page shows the base that actually does the work.

  • Informed choices about repairs

    You see whether it is an adjustment, a part or a replacement.

Close-up of a Shasama Fermetures technician’s hands grinding a metal shutter’s locking spindle, sparks visible

Fast response and emergencies in the 4th

Neighbourhood shop or tourist address, the same method.

Metal shutter spindle and coil assembly, close view of the mechanism in its housing
  • No time slot ruled out

    A fault is reported when it happens.

  • The mechanism speaks first

    Observation, measurement, then a conclusion.

  • Only justified parts

    A component is replaced when a fault is found.

  • Operation replayed from start to finish

    The shutter completes a full cycle before we leave.

  • A traceable amount

    Your agreement comes before the work.

Shopfront stuck? Describe the shutter or the grille.

01 87 66 40 33

How do you maintain an old shutter without forcing it?

An old mechanism needs gentle handling.

  • Regular use of the manual override : Turning the crank every quarter stops it from seizing.
  • Watch for rust spots : Treating early corrosion saves the slat.
  • Bolt play measured : A bolt that rubs signals a misalignment.
  • Box kept dry : Check it is watertight after heavy rain.

Every old closure has its own history.

Our jobs around the 4th

Motorised axle replacement on a metal shutter in Paris 4e

Rue de Rivoli, 75004 Paris

Shasama Fermetures worked on rue de Rivoli, in Paris 4e, to replace a metal shutter’s motorised axle. The old axle was removed from the ceiling-mounted headbox, then the new one fitted and tested through opening and closing.

Replacement of a metal shutter motorised axle, axle exposed in an open headbox with fire-safety instructions on the wall
Replacement of a metal shutter motorised axle, shutter closed beneath the exposed axle with a ladder and drill

How the job went:

  1. Remove the metal shutter’s old motorised axle
  2. Fit the new motorised axle inside the ceiling-mounted headbox
  3. Test opening and closing before returning it to service

Our jobs in the Paris region

Prices for repairing a shop metal shutter or security grille

The price depends on the fault found, the parts needed, the type of curtain and access to the shopfront. The quote presented before any work sets out the service and the final amount for your approval.

Metal shutter emergency repair, repair and maintenance prices, including VAT (TTC)
ServicePrice
Emergency and unblocking
Emergency repair146 €
Unblocking146 €
General repair147 €
Repairs and parts
Motor and control diagnosis or repair166 €
Adjusting springs, barrel or guide rails166 €
Straightening slats213 €
Replacing slats296 €
Replacing the lock147 €
Replacing the motor395 €
Replacing the barrel (manual shutter)417 €
Replacing the barrel (motorised shutter)495 €
Replacing parts (motor capacitor)From 98 €
Replacing springs and rebalancingFrom 178 €
Adjusting or straightening guide railsFrom 225 €
Replacing guide railsFrom 295 €
Replacing a key switchFrom 98 €
Maintenance and contracts
Manual shutter maintenance98 €
Motorised shutter maintenance118 €
Annual contract (1 visit a year)From 94 €/year
Annual contract (2 visits a year)From 116 €/year

Quote terms

After the shutter is diagnosed, the quote details the work, the parts, the access conditions and the agreed time slot. It states the final amount before any work; no additional service is started without your agreement.

  • the fault and the component actually involved
  • manual or motorised shutter and the size of the curtain
  • the parts and adjustments chosen after diagnosis
  • access to the shopfront, the box and the barrel
Request a quote
Shasama Fermetures technician loading a ladder onto the service van in a Paris street at night
Expertise and
24 years of experience
  • Professional-grade equipment and parts
  • Axial, tubular or side motors, all brands: CAME, Somfy, Nice, FAAC, Simu, ACM, Doorgate, Sommer, Hörmann
  • Shop shutters and grilles: solid, micro-perforated or transparent slats, wavy-tube grille (Cobra)
  • Locks and locking systems: diagnosis and repair component by component, multipoint locks included

Frequently asked questions about shop shutters

The grille was forced last night, where do I start?

Secure the entrance without operating the closure, then call.

Do you work on the Île Saint-Louis despite the difficult access?

Yes, parking is arranged in advance.

Does a co-ownership have to approve the repair?

The managing agent’s approval may be required; the quote can be sent to them.

How is a metal shutter lock damaged in a break-in priced?

The diagnosis identifies the compromised parts before the quote.

Do you keep the original parts you replace?

The original parts replaced on the closure can be kept on request, in particular to complete the insurance file for the job.

Does a universal remote work with every electric metal shutter?

The control and the motor have to be identified. Compatibility and tests are confirmed before a replacement control is chosen.

To see every fault we handle, our prices and how a call-out works in the 4th, see our metal shutter repair service in Paris and Île-de-France.

Nearby

Metal shutter repair in the 4th and neighbouring arrondissements

The 4th is surrounded by three arrondissements covered by the same repair service. Each of the twenty Paris arrondissements has its own page.

SMS confirmation: a Shasama Fermetures technician is on the way
Rapid response

Need an intervention?

An operator on the line, a technician at your door. Available 24/7.

01 87 66 40 33Call usFree Quote