Skip to main content
Shasama Fermetures

Metal shutter repair in Paris 8th (75008)

Two Shasama Fermetures technicians working on a closed metal shutter, one at the guide rail, the other at the top
Shutter and grille repair: 24/7
  • Responsible base: Paris 13th25 rue de Tolbiac, 75013 Paris
  • Diagnosis before repairCurtain, barrel, motor and controls
  • Quote before workYour agreement before any repair
  • Operating cyclesRaising, lowering and stops checked

Metal shutter stuck in Paris 8th? Closed, open or jammed halfway?

Shasama Fermetures works 24/7 to unblock and repair your metal shutter. Our technicians carry out an on-site diagnosis, find the cause of the fault and give you a free quote before any repair.

For any metal shutter repair in Paris 8th, call Shasama Fermetures on 01 87 66 40 33. Fast response across Paris and Île-de-France, subject to our teams’ availability.

Champs-Élysées, faubourg Saint-Honoré and Madeleine: Shasama Fermetures repairs the metal shutters of the 8th.

A prominent shop window deserves a response to match: direct reporting and a discreet time slot. A metal shutter repair starts from 146 €, and your call is taken by the Paris 13th agency. Call us now on 01 87 66 40 33!

01 87 66 40 33

Metal shutter repair near the Champs-Élysées

Large window on the Champs that stops halfway, grille in the faubourg that slams: describe the fault and we prepare the right equipment.

Shop windows in the 8th are large and open late.

The Paris 13th base coordinates the job.

Administrative districts covered in Paris 8th (75008): Champs-Elysées, Faubourg-du-Roule, Madeleine, Europe.

Work carried out on site: At 84 avenue des Champs-Élysées, we replaced to measure the barrel and micro-perforated curtain of a first shutter, then restored the second.

The large bays of the 8th, a dedicated approach

  • Fault reporting without delay

    Line active 24/7.

  • Sizing planned ahead

    Heavy curtains and powerful motors are anticipated.

  • An identifiable base

    The team comes from the Paris 13th base.

  • Pricing that suits purchasing departments

    The quote follows the format a head office expects.

Ladders set up in front of a closed metal shutter, ready for a repair

Emergency on a large bay in Paris 8th

Five commitments, whatever the shop window.

Metal shutter curtain and motor spindle visible in a timber-framed housing
  • A prompt response to your report

    A person qualifies the fault from the first call.

  • Analysis before replacement

    The exact cause is established first.

  • Opening hours respected

    Before opening or after closing if needed.

  • Tests under load

    Final cycles in real conditions.

  • An amount set by contract

    The signed quote is binding.

Shopfront stuck? Describe the shutter or the grille.

01 87 66 40 33

Maintaining a flagship shop window without taking it out of service

Four steps are enough, carried out like a night operation.

  • Night-time checks : Window closed, out of sight of passers-by.
  • Motor torque monitored : A drift in power draw signals wear.
  • Locking points counted : Every point of the multipoint lock engages fully.
  • Records kept up to date : Each visit feeds the head office file.

The interval follows the brand’s real cycles.

Our jobs around the 8th

Motorised axle and microperforated curtain replacement on a metal shutter in Paris 8e

Paul les Champs-Élysées: 84 avenue des Champs-Élysées, 75008 Paris

Shasama Fermetures worked at Paul les Champs-Élysées, 84 avenue des Champs-Élysées in Paris 8e, on two metal shutters. The first shutter’s motorised axle and microperforated curtain were replaced to measure, its guide rails ground and adjusted, then the second shutter restored to working order.

Replacement of the motorised axle and curtain on a metal shutter, technician on a ladder by a shopfront at night
Replacement of the motorised axle and curtain on a metal shutter, grinding a guide rail with a shower of sparks
Replacement of the motorised axle and curtain on a metal shutter, profiles laid in front of a glazed shopfront

How the job went:

  1. Remove the first metal shutter’s old axle and old curtain
  2. Fit the new motorised axle and the made-to-measure microperforated curtain
  3. Grind and adjust the curtain’s guide rails
  4. Restore the second metal shutter to working order
  5. Check the operation of both shutters before returning them to service

Specification of the installed shutter:

  • Shutter 1: motorised axle and microperforated curtain (L 2240 DC × 4300 + E)
  • Shutter 2: metal shutter restored to working order

Our jobs in the Paris region

Prices for repairing a shop metal shutter or security grille

The price depends on the fault found, the parts needed, the type of curtain and access to the shopfront. The quote presented before any work sets out the service and the final amount for your approval.

Metal shutter emergency repair, repair and maintenance prices, including VAT (TTC)
ServicePrice
Emergency and unblocking
Emergency repair146 €
Unblocking146 €
General repair147 €
Repairs and parts
Motor and control diagnosis or repair166 €
Adjusting springs, barrel or guide rails166 €
Straightening slats213 €
Replacing slats296 €
Replacing the lock147 €
Replacing the motor395 €
Replacing the barrel (manual shutter)417 €
Replacing the barrel (motorised shutter)495 €
Replacing parts (motor capacitor)From 98 €
Replacing springs and rebalancingFrom 178 €
Adjusting or straightening guide railsFrom 225 €
Replacing guide railsFrom 295 €
Replacing a key switchFrom 98 €
Maintenance and contracts
Manual shutter maintenance98 €
Motorised shutter maintenance118 €
Annual contract (1 visit a year)From 94 €/year
Annual contract (2 visits a year)From 116 €/year

Quote terms

After the shutter is diagnosed, the quote details the work, the parts, the access conditions and the agreed time slot. It states the final amount before any work; no additional service is started without your agreement.

  • the fault and the component actually involved
  • manual or motorised shutter and the size of the curtain
  • the parts and adjustments chosen after diagnosis
  • access to the shopfront, the box and the barrel
Request a quote
Shasama Fermetures technician loading a ladder onto the service van in a Paris street at night
Expertise and
24 years of experience
  • Professional-grade equipment and parts
  • Axial, tubular or side motors, all brands: CAME, Somfy, Nice, FAAC, Simu, ACM, Doorgate, Sommer, Hörmann
  • Shop shutters and grilles: solid, micro-perforated or transparent slats, wavy-tube grille (Cobra)
  • Locks and locking systems: diagnosis and repair component by component, multipoint locks included

Frequently asked questions about shop shutters

Do you work at night on the Champs-Élysées?

Yes, the line answers 24/7.

A shop window over six metres wide, is that a problem?

A shop window over six metres wide does not prevent the repair, but its width must be mentioned when you call so the right tools can be planned.

Our head office requires a quote, is that covered?

Yes, pricing always comes before the work.

How is a repair priced for a shutter with centralised control?

The control system and the mechanism are examined before the written quote.

Do you handle shutters with centralised control?

Yes, whatever automation is installed.

Does a large width change how the removal of a shutter is prepared?

Mention the width when you call so the right tools can be prepared.

To see every fault we handle, our prices and how a call-out works in the 8th, see our metal shutter repair service in Paris and Île-de-France.

Nearby

Metal shutter repair in the 8th and neighbouring arrondissements

The 8th is surrounded by three arrondissements covered by the same repair service. Each of the twenty Paris arrondissements has its own page.

SMS confirmation: a Shasama Fermetures technician is on the way
Rapid response

Need an intervention?

An operator on the line, a technician at your door. Available 24/7.

01 87 66 40 33Call usFree Quote