Shasama Fermetures

Planned metal shutter repair in Paris and Île-de-France

01 87 66 40 33
Google Reviews5.0
Shasama technician checking the mechanical parts of a metal shutter
  • Planned repairAn appointment agreed once the need has been assessed.
  • Technical diagnosisParts and mechanisms are checked before any work.
  • 24 years of experienceMetal closures specialist.
  • Free quoteRepairs and parts detailed before intervention.

Shasama Fermetures carries out planned repairs on manual and motorised metal shutters across Paris and Île-de-France. We check the slats, springs, shaft, bearings, guides, lock, motor and control, then offer a targeted refurbishment or replacement of only the faulty parts. A free quote details the work before intervention.

Want a damaged shutter examined? Tell us about the repair at 01 87 66 40 33.

Your metal shutter repair specialist based in Paris 11e

Our team works with shops, professionals and property managers across Paris and Île-de-France to diagnose and refurbish their metal shutters.

The technical visit lets us examine the whole mechanism, identify the parts genuinely at fault, and compare a targeted repair with a more extensive replacement where the condition of the shutter requires it.

Repair is part of our metal shutter services, alongside emergency call-out, servicing and motorisation.

Diagnosis of a shop metal shutter by Shasama Fermetures

When to repair a metal shutter rather than replace it

A targeted repair is suitable when one or more parts are faulty but the overall structure of the shutter remains sound.

Slats, fittings, guides, locks and control devices can be repaired or replaced individually depending on their condition.

Springs, bearings and shaft components are checked together to restore the curtain's balance and guiding.

On a motorised shutter, a motor or control fault is distinguished from a new motorisation project.

A more complete replacement may be recommended if the curtain, shaft or supports have accumulated significant or unrecoverable damage.

When a stuck shutter needs to be put back into service immediately, that's an emergency call-out. This page covers planned mechanical or electrical repair.

The parts and mechanisms we repair

Diagnosis covers the components that make up, balance, guide, lock and drive the metal shutter.

  • Slats and curtain

    straightening or replacing slats that are warped, broken or out of alignment.

  • Springs and balance

    checking and replacing springs when the curtain becomes heavy or unbalanced.

  • Shaft and bearings

    adjusting or replacing worn parts that disrupt the curtain's winding.

  • Guides

    straightening, adjusting or replacing rails that cause friction or deviation.

  • Lock and latches

    repairing or replacing the devices that secure the closure.

  • Motor and control

    diagnosing the existing motorisation, limit switches and associated controls.

Our metal shutter repair services

Each service addresses an identified fault, without forcing the full replacement of a shutter that's still repairable.

  • Refurbishing the curtain : Straightening, realigning or targeted replacement of damaged slats and fittings.
  • Repairing the shaft and balance : Work on the springs, bearings and compensation parts needed for smooth operation.
  • Correcting the guiding : Adjusting or replacing the guides when the curtain rubs, deviates or runs unevenly.
  • Repairing the locking devices : Refurbishing or replacing the lock, cylinder and compatible latches.
  • Repairing the existing motorisation : Diagnosis and targeted replacement of the motor, control or faulty limit switches.

Our repair protocol

  1. 01

    Technical diagnosis

    We inspect the curtain, guiding, shaft, balance, lock and existing motorisation.

  2. 02

    Targeted repair

    Repairable parts are straightened, realigned or refurbished according to the diagnosis.

  3. 03

    Replacing faulty parts

    Irreparable parts are replaced with compatible references, once the quote is approved.

  4. 04

    Mechanism adjustments

    Balance, guiding, travel and locking devices are adjusted.

  5. 05

    Final test

    Several cycles check the opening, closing, alignment and locking of the shutter.

Why trust Shasama Fermetures with your repair?

  • Hands-on expertise

    Practical experience with manual and motorised metal shutters.

  • Planned appointment

    The slot is set according to the diagnosis and the parts required.

  • Targeted repair

    The proposed work matches the faults actually found.

  • Free quote

    Labour and parts are detailed before intervention.

  • 5.0/5 on Google

    67 customer reviews on Google.

  • Based in Paris 11e

    18 Passage Gustave Lepeu, 75011 Paris, France

How much does a metal shutter repair cost?

From 147 € after diagnosis. The quote details the part and repair before work begins.

General repair

From 147 €

Straightening or replacing slats

From 296 €

Replacing springs and adjusting the balance

From 179 €

Repairing the shaft or replacing bearings

From 495 €

Adjusting or replacing guides

From 295 €

Repairing lock, cylinder or latches

From 79 €

Repairing the motor or control

From 196 €

Repair or replace: a decision after diagnosis

The quote distinguishes repairable parts, parts to be replaced, and any additional work. A full replacement is only proposed when the condition or compatibility of the whole justifies it.

  • Nature and number of faulty parts
  • Type, dimensions and weight of the shutter
  • Condition of the curtain, shaft and guides
  • Mechanical or electrical repair
  • Availability and compatibility of parts
  • Access and site conditions
Request a repair quote

Where do we work?

Our teams serve Paris, Île-de-France, Hauts-de-France and Reims (51). View all coverage areas

Services related to repair:Metal shuttersMetal shutter breakdownMetal shutter motorisationServicing & maintenance

Frequently asked questions about repair

How much does repairing a metal shutter cost?
The price depends on the part at fault, the overall condition of the shutter, its motorisation and access conditions. After diagnosis, we provide a free quote detailing the labour and parts needed.
Should I repair or replace a damaged metal shutter?
A targeted repair is generally worthwhile when the structure, supports and most of the mechanism remain in good condition. A more extensive replacement may be preferable if several major components are deformed, worn or incompatible. Diagnosis lets us compare both options.
How long does a metal shutter repair take?
The duration depends on the diagnosis and the availability of parts. A targeted fix can often be carried out during a single visit, while a shaft, curtain or specific part may need preparation or a second visit. The timeframe is confirmed with the quote.
Which metal shutter parts do you replace, and what warranty applies?
Slats, springs, bearings, locks, cylinders, motors and controls are among the common parts, subject to compatibility and availability. The warranty applicable to parts and labour is stated in the quote and the documents provided. No generic timeframe is announced before diagnosis.
SMS confirmation: a Shasama technician is on the way
Rapid response

Need an intervention?

An operator on the line, a technician at your door. Available 24/7.

01 87 66 40 3301 87 66 40 33Request a quote
01 87 66 40 33Call usFree Quote