Responsible base: Paris 13th25 rue de Tolbiac, 75013 Paris
Diagnosis before repairCurtain, barrel, motor and controls
Quote before workYour agreement before any repair
Operating cyclesRaising, lowering and stops checked
Metal shutter stuck in Paris 12th? Closed, open or jammed halfway?
Shasama Fermetures works 24/7 to unblock and repair your metal shutter. Our technicians carry out an on-site diagnosis, find the cause of the fault and give you a free quote before any repair.
For any metal shutter repair in Paris 12th, call Shasama Fermetures on 01 87 66 40 33. Fast response across Paris and Île-de-France, subject to our teams’ availability.
Craftsmen of the Faubourg Saint-Antoine, traders at the Marché d’Aligre, shops in Bercy and on avenue Daumesnil: Shasama Fermetures gets the metal shutters of the 12th arrondissement working again.
A closed workshop is a lost day: we treat your shutter like your machines: cause identified, the right fix, full tests. A metal shutter repair starts from 146 €, and your call is taken by the Paris 13th agency. Call us now on 01 87 66 40 33!
Metal shutter repair close to the Faubourg Saint-Antoine
Workshop under the viaduct whose shutter will no longer come down, Aligre market stall with a buckled grille: describe the mechanism as you know it, even roughly.
The 12th keeps a real workshop culture: many shutters there protect cabinetmakers’ workshops, stockrooms or back shops. Tell us whether the closure opens onto the street, a craftsmen’s courtyard or a passage: access changes everything.
The responsible base, Paris 13th, just across the Seine, organises the job; Aligre or Daumesnil serve only as a compass.
Administrative districts covered in Paris 12th (75012): Bel-Air, Picpus, Bercy, Quinze-Vingts.
Work carried out on site: At 9 rue Jaucourt, we replaced the closure with a made-to-measure solid-slat shutter covering both bays of the shopfront.
What the 12th expects from a closure repair firm
Someone to talk to at any hour
Early Aligre markets or evening workshops: the 24/7 line follows your real hours.
Close by over the Pont de Bercy
The Paris 13th base, next door to the 12th, is listed in the Shasama Fermetures register with its exact address.
Craftsmen’s courtyards and passages we know
A shutter at the back of a courtyard can be repaired too; explain the access and the width of the passage.
A quote that respects craftsmanship
Lasting repairs come before a standard swap; every line is justified.
Workshop or shop emergency in the 12th: the steps to follow
These steps set the pace of every job, for the stall as for the workshop.
Describing the jam while it is fresh
Your own words are enough; the technical vocabulary will come from the diagnosis.
A full mechanical inspection
Curtain, springs, guiding and control are all reviewed, not just the suspect component.
A quote in plain language
Each item says what it repairs and why it is needed.
Work only after your agreement
Without approval, the closure stays in its secured state.
A shared acceptance cycle
You operate the repaired shutter yourself before signing.
Shopfront stuck? Describe the shutter or the grille.
How do you maintain the closure of a workshop in the 12th?
Craftsmen in the 12th look after their machines; the shutter deserves the same routine.
Blow out the rails at the end of the week : The workshop air gun clears sawdust and dust from the guide rails in a minute.
Listen to the bearings on the first operation : A barrel that rumbles when cold needs its bearings re-greased promptly.
Check the double lock turn : A key that catches signals a worn cylinder; better to act early.
Book a visit after every knock : Any impact during handling justifies a check of the curtain, even without a jam.
The interval between visits follows the activity of the workshop or stall; it is decided with you, based on the use observed.
Our jobs around the 12th
Made-to-measure shopfront metal shutter replacement in Paris 12e
Terrasse Beirut: 9 rue Jaucourt, 75012 Paris
Shasama Fermetures worked at Terrasse Beirut, 9 rue Jaucourt in Paris 12e, to replace the shopfront’s metal shutter to measure. The old closure was removed and the new solid-slat shutter fitted across the restaurant’s two bays, then its full closing checked.
How the job went:
1Remove the shopfront’s existing metal shutter
2Fit the metal shutter made to the shop’s own dimensions
3Check both bays close fully before returning the shutter to service
Prices for repairing a shop metal shutter or security grille
The price depends on the fault found, the parts needed, the type of curtain and access to the shopfront. The quote presented before any work sets out the service and the final amount for your approval.
Metal shutter emergency repair, repair and maintenance prices, including VAT (TTC)
Service
Price
Emergency and unblocking
Emergency repair
146 €
Unblocking
146 €
General repair
147 €
Repairs and parts
Motor and control diagnosis or repair
166 €
Adjusting springs, barrel or guide rails
166 €
Straightening slats
213 €
Replacing slats
296 €
Replacing the lock
147 €
Replacing the motor
395 €
Replacing the barrel (manual shutter)
417 €
Replacing the barrel (motorised shutter)
495 €
Replacing parts (motor capacitor)
From 98 €
Replacing springs and rebalancing
From 178 €
Adjusting or straightening guide rails
From 225 €
Replacing guide rails
From 295 €
Replacing a key switch
From 98 €
Maintenance and contracts
Manual shutter maintenance
98 €
Motorised shutter maintenance
118 €
Annual contract (1 visit a year)
From 94 €/year
Annual contract (2 visits a year)
From 116 €/year
Quote terms
After the shutter is diagnosed, the quote details the work, the parts, the access conditions and the agreed time slot. It states the final amount before any work; no additional service is started without your agreement.
the fault and the component actually involved
manual or motorised shutter and the size of the curtain